The Sunburst Awning has its origins in North America
but unlike its fully imported competitors, Aussie Traveller now manufactures
the Sunburst in Australia. We took the opportunity that arose to purchase the
plant and equipment from our previous overseas supplier and established it here
in our Brisbane factory.
Now you have the opportunity of purchasing
the best "American Style" awning in the world - the Sunburst Awning
- made here in Australia.
The quality of the componentary and the design of
the awning makes the Sunburst Awning superior in many areas. Some of these features
are highlighted below.
It is superior in the following areas.
The design and configuration to its frame
set. The four telescopic components of the frame set structure have been
engineered for superior overall strength and ease of telescoping without adversely
affecting the finish on the powder coated surfaces.
One of the most common complaints received
on all these styles of American rollout awnings is their proneness to rattle
in a breeze. These rattles generally emanate at the extremities of the
top mount bracket and rafter arm ends. Aussie Traveller have added bushes
to these positions and coiled with unique spring fixing at the rafter/roller
junctions this rattling has been largely overcome.
Similarly, a rubber buffer is positioned between the inner
rafter arm and the outer leg. When the frame set is folded for travelling,
this rubber buffer, in unison with our unique sliding travel lock, renders
the awning rattle/vibration free when
on the move which eliminates wear and tear and protects the powder coated
finish.
The frame set control handle has a childproof
two step release system.This prevents the frame
set being idly tampered with. The first action of lifting the handle does
not release the locking pin which can only be disengaged by the second stage
trigger action.
The roller lock/unlock is a ratchet action which
is superior to the camlock action of most other awnings. In addition, the
roller lock on the Classic is able to be actioned via a remote switch located
on the right hand side frame set at an accessible height. This eliminates
the need to reach up to the lock/unlock lever on the roller itself.
The specially engineered frame set components, not only provide
superior strength, but have built in wear ridges which eliminate
broad rub surfaces when the frame set is erected and demounted. This isolates
any wear on the powder coated surfaces to a minimum.
The Classic roller ends have protective shrouds attached
which not only add to the cosmetic appearance but provide some protection
to the roller from overhanging branches and/or dust and rain entering the
fabric roll when travelling.
In addition to the above, the fact that the awnings
are manufactured locally makes parts and componentary readily available
in the event they are required. Unlike our competitors, it is our policy where
possible to make available individual parts rather than complete components
- this greatly reduces the cost of minor repairs.
All of the features mentioned above are
unique to
Sunburst Awning Range
Contact
details for Aussie Traveller are Emailenquiries@aussietraveller.com.au Phone 07 3868 3868 (International
+61 7 3868 3868) Fax 07 3868 3869
(International +61 7 3868 3869)
989 Kingsford Smith Drive, Eagle Farm, Brisbane, Qld. 4009 Australia Agents throughout Australia
For
problems or queries with this site, please contact the webmaster.
The details on this site are for information only and some photographs or graphics
could contain items which are an optional extra.